dredge n : a power shovel to remove material from a channel or riverbed

1 cover before cooking; "dredge the chicken in flour before frying it"

2 search (as the bottom of a body of water) for something valuable or lost [syn: drag]

3 remove with a power shovel, usually from a bottom of a body of water

English

Pronunciation

• Rhymes: -ɛdʒ

Noun

1. Any instrument used to gather or take by dragging; as: (a) A dragnet for taking up oysters, etc., from their beds. (b) A dredging machine. (c) An iron frame, with a fine net attached, used in collecting animals living at the bottom of the sea.
2. Very fine mineral matter held in suspension in water.

Translations

Verb

1. to make a channel deeper or wider using a dredge
2. to bring something to the surface with a dredge
3. to unearth

Related terms

• dredger
• dredging

Dredging is an excavation activity or operation usually carried out at least partly underwater, in shallow seas or fresh water areas with the purpose of gathering up bottom sediments and disposing of them at a different location, mostly to keep waterways navigable. A dredge is a device for scraping or sucking the seabed, used for dredging. A dredger is a ship or boat equipped with a dredge (though in American usage, there is no added letter).

The process of dredging creates spoils (excess material), which are conveyed to a location different from the dredged area. Dredging can produce materials for land reclamation or other purposes (usually construction-related), and has also historically played a significant role in gold mining. Dredging can create disturbance in aquatic ecosystems, often with adverse impacts.

Uses

Usage

• Capital: dredging carried out to create a new harbour, berth or waterway, or to deepen existing facilities in order to allow larger ships access. This process is usually carried out with a cutter-suction dredge.

• Preparatory: work and excavation for future bridges, piers or docks/wharves, often connected with foundation work.

• Maintenance: dredging to deepen or maintain navigable waterways or channels which are threatened to become silted with the passage of time, due to sedimented sand and mud, possibly making them too shallow for navigation. This is often carried out with a trailing suction hopper dredge. Most dredging is for this purpose, and it may also be done to maintain the holding capacity of reservoirs or lakes.

• Land reclamation: dredging to mine sand, clay or rock from the seabed and using it to construct new land elsewhere. This is typically performed by a cutter-suction dredge or trailing suction hopper dredge. The material may also be used for flood or erosion control.

• Beach nourishment: mining sand offshore and placing on a beach to replace sand eroded by storms or wave action. This is done to enhance the recreational and protective function of the beaches, which can be eroded by human activity or by storms. This is typically performed by a cutter-suction dredge or trailing suction hopper dredge.

• Harvesting materials: dredging sediment for elements like gold or other valuable trace substances.

• Seabed mining: a possible future use, recovering natural metal ore nodules from the sea's abyssal plains.

• Anti-eutrophication: Dredging is an expensive option for the remediation of eutrophied (or de-oxygenated) water bodies. However, as artificially elevated phosphorus levels in the sediment aggravate the eutrophication process, controlled sediment removal is occasionally the only option for the reclamation of still waters.

• Contaminant remediation: to reclaim areas affected by chemical spills, storm water surges (with urban runoff), and other soil contaminations. Disposal becomes a proportionally large factor in these operations.

• Removing trash and debris: often done in combination with maintenance dredging, this process removes non-natural matter from the bottoms of rivers and canals and harbors.

Relevance

Without the many and almost non-stop dredging operations world wide, much of the world's commerce would be impaired, often within a few months, since much of world's goods travel by ship, and need to access harbours or seas via channels. Recreational boating also would be constrained to the smallest vessels. The majority of marine dredging operations (and the disposal of the dredged material) will require that appropriate licences are obtained from the relevant regulatory authorities, and dredging is usually carried out by (or for) harbour companies or corresponding government agencies.

Types of Dredging Vessels

Suction

These operate by sucking through a long tube, like some vacuum cleaners. A plain suction dredger has no tool at the end of the suction pipe to disturb the material. This is often the most commonly used form of dredging.

Trailing suction

A trailing suction hopper dredger (TSHD) trails its suction pipe when working, and loads the dredge spoil into one or more hoppers in the vessel. When the hoppers are full the TSHD sails to a disposal area and either dumps the material through doors in the hull or pumps the material out of the hoppers. Some dredges also self-offload using drag buckets and conveyors. The largest trailing suction hopper dredger in the world is currently Vasco da Gama (Jan De Nul) with its 33,000 cu.m. hopper and a maximum dredging depth of 135m. The next mega trailing suction hopper dredgers Cristobal Colon and Leiv Eriksson are actually under construction in Spain and should be delivered in 2008. Main design specs are the 46,000 cu.m. hopper and a design dredging depth of 155m. http://www.jandenul.com

Cutter suction

A cutter-suction dredger's (CSD) suction tube has a cutter head at the suction inlet, to loosen the earth and transport it to the suction mouth. The cutter can also be used for hard surface materials like gravel or rock. The dredged soil is usually sucked up by a wear resistant centrifugal pump and discharged through a pipe line or to a barge. In recent years dredgers with more powerful cutters have been built in order to excavate harder and harder rock without blasting. The two largest cutter suction dredgers in the world are Deme's D'Artagnan (28,200 kW total installed power), and Jan De Nul's J.F.J. DeNul (27,240 kW).

Auger suction

This process functions like a cutter suction dredger, but the cutting tool is a rotating Archimedean screw set at right angles to the suction pipe. The first widely used auger dredges were designed by Mud Cat Dredges in the 1980s.

Jet-lift

This uses the Venturi effect of a concentrated high-speed stream of water to pull the nearby water, together with bed material, into a pipe.

Air-lift

An airlift is a type of small suction dredge. It is sometimes used like other dredges. At other times, often an airlift is used handheld underwater by a diver. It works by blowing air into the pipe, and dragging water with it.

Bucket

A bucket dredger is a dredger equipped with a bucket dredge, which is a device that picks up sediment by mechanical means, often with many circulating buckets attached to a wheel or chain. Some bucket dredgers and grab dredgers are powerful enough to work through coral reefs to make a shipping channel.

Grab

A grab dredger picks up seabed material with a clam shell grab, which hangs from either an onboard crane or a crane ship, or is carried by a hydraulic arm, or is mounted like on a dragline. This technique is often used in excavation of bay mud. Most of these dredges are crane barges with spuds.

Backhoe/dipper

A backhoe/dipper dredge has a backhoe like on some excavators. A crude but usable backhoe dredger can be made by mounting a land-type backhoe excavator on a pontoon. The two largest backhoe dredgers in the world were Tauracavor (Great Lakes), New York (Great Lakes) and Il Principe (Jan De Nul). Both feature a barge mounted excavator. In 2007, the new generation of backhoe dredgers has arrived. The backhoe dredge of the ‘Backacter’ type 1100 is a new and revolutionary designed type of dredging excavator mounted on a pontoon with enhanced capabilities in respect of penetration force, production and maintenance. Featuring double the power of the ‘Il Principe’ backhoe dredge of the Jan De Nul’s fleet, these ‘Backacters’ are by far the biggest backhoe dredges in the world. http://www.jandenul.com

Water injection

A water injection dredger injects water in a small jet under low pressure (low pressure because the sediment should not explode into the surrounding waters, rather it is carefully moved to another location) into the seabed to bring the sediment in suspension, which then becomes a turbidity current, which flows away down slope, is moved by a second burst of water from the WID or is carried away in natural currents. Opposition claims that Water Injection Dredging is not a natural way of dredging while the side of the WID claims otherwise.

As a side note: Water injection results in a lot of sediment in the water which makes measurement with most hydrographic equipment (for instance: singlebeam echosounder) difficult and should make use of filtering to produce better results.

Pneumatic

These dredgers use a chamber with inlets, out of which the water is pumped with the inlets closed. It is usually suspended from a crane on land or from a small pontoon or barge. Its effectiveness depends on depth pressure.

Bed leveler

This is a bar or blade which is pulled over the seabed behind any suitable ship or boat. It has an effect similar to that of a bulldozer on land.

Krabbelaar

This is an early type of dredger which was formerly used in shallow water in the Netherlands. It was a flat-bottomed boat with spikes sticking out of its bottom. As tide current pulled the boat, the spikes scraped seabed material loose, and the tide current washed the material away, hopefully to deeper water. Krabbelaar is Dutch for "scratcher".

Other types

Amphibious

Some of these are any of the above types of dredger, which can operate normally, or by extending legs, also known as spuds, so it stands on the seabed with its hull out of the water. Some forms can go on land.

Some of these are land-type backhoe excavators whose wheels are on long hinged legs so it can drive into shallow water and keep its cab out of water. Some of these may not have a floatable hull and, if so, cannot work in deep water.

• Oliver Evans (1755-1819) in 1804 invented an amphibious dredger which was America's first steam-powered road vehicle.

Submersible

These are usually used to recover useful materials from the seabed. Many of them travel on caterpillar tracks.

This link describes a type intended to walk on legs on the seabed. It is a summary of the article "Concept of a mathematical model for prediction of major design parameters of a submersible dredger/miner" by Sritama Sarkar, Neil Bose, Mridul Sarkar, and Dan Walker, in "3rd Indian National Conference on Harbour and Ocean Engineering, National Institute of Oceanography", Dona Paula, Goa 403 004 India, 7 - 9 December 2004: see http://www.nio.org for more information about publisher etc.

Fishing

There are types of dredges used for collecting scallops or oysters from the seabed. They tend to have the form of a scoop made of chain mesh. They are towed by a fishing boat. Scallop dredging is very destructive to the seabed, and nowadays is often replaced by scuba diving to collect the scallops.

Police drag

In some police departments a small dredge (sometimes called a drag) is used to find and recover objects and bodies from underwater. The bodies may be murder victims, or people who committed suicide by drowning, or victims of accidents. It is sometimes pulled by men walking on the bank.

Disposal of Materials

In a "hopper dredger", the dredged materials end up in a large onboard hold called a "hopper." A suction hopper dredger is usually used for maintenance dredging. A hopper dredge usually has doors in its bottom to empty the dredged materials, but some dredges empty their hoppers by splitting the two halves of their hulls on giant hinges. Either way, as the vessel dredges, excess water in the dredged materials is spilled off as the heavier solids settle to the bottom of the hopper. This excess water is returned to the sea to reduce weight and increase the amount of solid material (or slurry) that can be carried in one load. When the hopper is filled with slurry, the dredger stops dredging and goes to a dump site and empties its hopper.

Some hopper dredges are designed so they can also be emptied from above using pumps if dump sites are unavailable or if the dredge material is contaminated. Sometimes the slurry of dredgings and water is pumped straight into pipes which deposit it on nearby land. Other times, it is pumped into barges (also called scows), which deposit it elsewhere while the dredge continues its work.

When contaminated (toxic) sediments are to be removed, or large volume inland disposal sites are unavailable, dredge slurries are reduced to dry solids via a process known as dewatering. Current dewatering techniques employ either centrifuges, large textile based filters or polymer flocculant/congealant based apparatus.

In many projects, slurry dewatering is performed in large inland settling pits, although this is becoming less and less common as mechanical dewatering techniques continue to improve.

Similarly, many groups (most notable in east Asia) are performing research towards utilizing dewatered sediments for the production of concretes and construction block, although the high organic content (in many cases) of this material is a hindrance toward such ends.

Environmental impacts

Dredging can create disturbance to aquatic ecosystems, often with adverse impacts. In addition, dredge spoils may contain toxic chemicals that may have an adverse effect on the disposal area; furthermore, the process of dredging often dislodges chemicals residing in benthic substrates and injects them into the water column.

The activity of dredging can create the following principal impacts to the environment:

• Release of toxic chemicals (including heavy metals and PCB) from bottom sediments into the water column.
• Short term increases in turbidity, which can affect aquatic species metabolism and interfere with spawning.
• Secondary effects from water column contamination of uptake of heavy metals, DDT and other persistent organic toxins, via food chain uptake and subsequent concentrations of these toxins in higher organisms including humans.
• Secondary impacts to marsh productivity from sedimentation
• Tertiary impacts to avifauna which may prey upon contaminated aquatic organisms
• Secondary impacts to aquatic and benthic organisms' metabolism and mortality
• Possible contamination of dredge spoils sites

Gallery

See also

• Queen of the Netherlands
• WT Preston
• Weeks Marine

External links

• Directory of Dredgers (private photography series of dredgers)
• News and Equipment Exchange (Latest global news and equipment)
• Dredging News
• Dredging and Spoil Disposal Policy (pdf)(from the Australian Government)
• World of Boats at Eyemouth ~ Bertha Iron, Steam powered dredger or drag boat. Designed by Isambard Kingdom Brunel in 1844

avulse, besprinkle, bore, bread, breathe, brew, burrow, color, crumb, cut out, decoct, delve, deracinate, dig, dig out, dig up, digger, dike, disentangle, dot, drag up, draw, draw out, draw up, dredge up, dredger, drill, driller, drive, dust, dye, entincture, eradicate, evolve, evulse, excavate, excavator, excise, exsect, extract, extricate, fish up, flavor, flour, furrow, gather up, get out, gouge, gouge out, groove, groundhog, grub, grub up, haul up, imbrue, imbue, impregnate, infiltrate, infuse, instill, leaven, lower, mine, miner, navvy, penetrate, pepper, permeate, pervade, pick out, pick up, pluck out, pluck up, powder, pull, pull out, pull up, quarry, rake out, remove, rip out, root out, root up, sandhog, sap, sapper, saturate, scoop, scoop out, scrabble, scrape, scratch, season, shovel, sink, spade, spatter, speck, speckle, splatter, spot, sprinkle, steam shovel, steep, stud, suffuse, take out, take up, tear out, temper, tincture, tinge, transfuse, trench, trough, tunnel, tunneler, unearth, unravel, uproot, weed out, withdraw, wrest out